D20 Ultra Fidget Clicker by Pawpular Prints | Print on Demand

This roughly softball sized D20 features a keyboard key under every face, but not all of them are clicky! I know what you're thinking: Does it roll well? Yes, yes it does. Is it balanced? Who knows? Maybe? Does that make it any less fun? ABSOLUTELY NOT! This thing is fun to fidget with and roll around, kid tested by the owner's offspring.

Fidget clickers are pre-assembled and ready for use when they arrive.

PLEASE NOTE: The faces are not glued in and may come loose over time. They can be glued back in place using super glue if they come off too easily. Apply the glue to the "+" shaped hole in the bottom of the face and push it back onto the key. PLA plastic is not suitable to be left near a heat source or in a hot vehicle. Excessive heat may cause warping and deformation.

All D20 Ultras will come with the following key breakdown:

• 1-key: Grey switch (Silent, no click)
• 2-19 keys: White switch (medium click, medium sound)
• 20-key: Navy switch (strong click, strong sound)

Current Color Combo descriptions:

• Evergreen comes in frosty evergreen with bronze hubs and white numbering. It features a Dragon for the 20 face and $#!& for the 1.
• The Platypus comes in teal with orange hubs and brown numbering. It features a Platypus for the 1 and a Fedora for the 20.
• The Bulldog comes in red with black hubs and white numbering. It features a bulldog for the 20 with standard numbers for 1-19. (Picture coming soon)
• The Gator comes in orange with blue hubs and white numbering. It features a gator for the 20 with standard numbers for 1-19. (Picture coming soon)
• The Elephant comes in crimson with gray hubs and white numbering. It features an elephant for the 20 with standard numbers for 1-19. (Picture coming soon)
• The Tiger comes in purple with yellow hubs and numbering. It features a tiger head for the 20 with standard numbers for 1-19. (Picture coming soon)
• The Other Tiger comes in navy blue with orange hubs and white numbering. It features a tiger head for the 20 with standard numbers for 1-19. (Picture coming soon)

Have a color-combo you want created? Do you want a different emblem for the 20 or 1 faces, or just plain numbers all around? Send us a message and we would be happy to create a customized colorway or emblem face for you!

Models are the creative property of and designed by the sculptor listed below. A link to their catalog of available models is provided as well. The Meeple Room subscribes to or purchases a direct license to sell printed copies of the listed sculptor's models, never the raw files themselves. Anyone selling the raw files other than the sculptor is doing so without the permission of the sculptor.

Commercially licensed seller of Pawpular Prints models. Check out their work on Patreon: https://www.patreon.com/c/PawpularPrints/posts

Images are photos of the models taken by The Meeple Room

All models are printed in Gray resin at 40um layer height. Models with significant parts that require translucent resin will have those parts printed in a translucent resin that will require post-processing.
Product Disclaimer

The 3D printed models provided are intended for decorative, educational, or functional purposes and are not designed as toys. These items are not suitable for children under the age of 3, as they may present a choking hazard or contain small parts.

Warning:

This product is not a toy.

Keep out of reach of children under 3 years of age.

Inspect the product for sharp edges or small detachable parts before use.

By purchasing or using this product, you acknowledge and agree to handle it responsibly and in accordance with this disclaimer. The manufacturer assumes no liability for misuse of the product.